6000 Series Open

Deep groove ball bearings are available in a variety of sizes and are the most popular of all rolling bearings. This type of bearing supports radial load and a certain degree of axial load in both directions simultaneously. Open bearings are usually found in applications where there is a source of lubrication and they are protected from the ingress of foreign particles e.g Gearboxes.

Guide to suffixes:

• C2 = Reduced internal clearance over standard.
• Nothing = Standard Internal clearance 'CN'.
• CM = Electric Motor internal clearance.
• C3 = Greater internal clearance * This can be usually be used in place of CN and CM * (This does not apply in reverse).
• NR = Comes with Snap Ring and Groove on outer race to assist axial positioning.

For advice and technical support please use the webchat facility at the bottom of the page or call our sales hotline on 0845 124 7344. Alternatively you can refer to the manufacturers technical catalogue by following this link.