CONE HEATER For heating bearings, enabling easy mounting by means of shrink fitting.
A correct mounting method extends bearing life. Electric heating is a safe alternative to traditional methods such as hammering, oil baths or even blow torches! Also suitable for heating gears, bushes, cogwheels, couplings and other round metal workpieces.
The affordable alternative! If your budget is limited then the BETEX Cone Heater is an affordable alternative to other heating systems. It is easy to use and suitable for a variety of sizes. The aluminium body is light weight and ensures fast, even heating.
Advantages CHU (Uncontrolled Temperature version):
- Easy-to-use, just plug in and switch on
- Light weight, easy to move around
- Reliable & flexible
- Safe & clean operation
Additional Advantages CHC (Controlled Temperature version):
- With preset temperature 120°C / 248°F
- With temperature hold: the unit will keep the bearing at preset temperature.
|Technical specifications||Diameters for each ring of the Cone Heater|
|Type Cone Heater||CHU||CHC||mm||inches|
|Voltage / Amp||120V / 6A230V / 3.2A||120V / 6A230V / 3.2A||15||0.59|
|Max. weight ± kg / lb||5-7Kg / 11-15.5lb||5-7Kg / 11-15.5lb||52||2.05|
|Min. ID Ø, mm / inch||10 / 3/8"||10 / 3/8"||77||3.03|
|Max. ID Ø, mm / inch||203 / 8.1"||203 / 8.1"||105||4.13|
|Max. OD Ø, mm / inch||305 / 12.0"||305 / 12.0"||135||5.31|
|Temperature control in ºC and °FFixed temperature||-||120ºC / 250ºF||160||6.30|
|Dimensions mm / inches L x W x H||365x220x240 / 14.4x8.6x9.4"||365x220x240 / 14.4x8.6x9.4"||Note: Intermediate sizes of workpieces also fit|